欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于ADINA的摆动液压马达设计与位置控制试验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51775131);江苏省六大人才高峰培养项目(JXQC36);徐州工程学院校青年基金项目(XKY2017226)


Research on Design and Position Control Experimental of Swing Hydraulic Motor Based on ADINA 
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    摆动液压马达功率密度比大、动态响应快,在伺服仿真转台等领域有着广泛的应用。为驱动负载进行100°范围内的摆动运动,基于ADINA有限元分析软件对摆动液压马达进行了分析,搭建了试验台,进行了摆动角度的位置控制试验研究。实验表明: 在该试验测试系统中,摆动液压马达的最大速度90°/s,最小速度约0.02°/s。基于该试验台,可以继续进行摆动液压马达密封性能和控制策略方面的深入研究。

    Abstract:

    The swing hydraulic motor has a large power density ratio and a fast dynamic response, and has a wide range of applications in the field of servo simulation turntables. In order to drive the load to swing in the range of 100°,the swing hydraulic motor based on ADINA software was analyzed, and the test bench was established to conduct the position control experiment of the swing angle.The experiments show that the maximum speed of the oscillating hydraulic motor is 90°/s and the minimum speed is about 0.02°/s in the test system. Based on the test bench, the sealing performance and control strategy of the oscillating hydraulic motor can be further studied.

    参考文献
    相似文献
    引证文献
引用本文

刘成强,杜博然.基于ADINA的摆动液压马达设计与位置控制试验研究[J].机床与液压,2019,47(7):10-13.
. Research on Design and Position Control Experimental of Swing Hydraulic Motor Based on ADINA [J]. Machine Tool & Hydraulics,2019,47(7):10-13

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-12-04
  • 出版日期: